1K/Turbo Tie Rods - Factory Style by L&W Fab

1K/Turbo Tie Rods - Factory Style by L&W FabThese Tie Rods Fit Polaris RZR 1000 and Turbo 2014 2024 models Specs on the Rods: These are factory style ball and socket tie rods. This listing is for a SET 6061 Aluminum. Made in America Lifetime Warranty on rod itself. Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end) To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the

These Tie Rods Fit Polaris RZR 1000 and Turbo

2014-2024 models

Specs on the Rods:

These are factory style ball and socket tie rods. 

This listing is for a SET

6061 Aluminum. 

Made in America

Lifetime Warranty on rod itself.

Comes with Spindle Ends (You do not need to purchase the spindle ends separate from this kit, unless you need a replacement spindle end) 

To determine whether you have M14 or M16, please measure the ends of you factory tie rods (the side that screws into the rack). If the end is less the 1/2″ you will need M14, if it is over 1/2″ you will need M16. The turbo model usually takes M16 ( measuring is recommended ), the 1000 model is not consistent and will need to be measured. 2016 Turbo will always be M14

Factory ends are not warrantied, only the tie rod itself. 

Specs for HD Rebuild-able Tie Rod Ends:

Fully rebuildable

Comes assembled with grease ready for installation Compatible with all L&W tie rods plus many others Starts with heat treated 4140 Black oxide finished

100 percent made in USA

This product holds an 18 month warranty

Options:

1) M14x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of Jam nut)

2) M16x1.5 rack side by m14x1.5 tie rod side. 5-5/8″ total length. (4″ length from rack to end of jam nut)

CB 1/27/25