Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Legion LTI-125MV Steam KettlesLegion LTI 125 Insulated Direct Steam Kettle with MV Twin Shaft Mixer 125 Gal Stationary 2 3 Jacket 304 Stainless 30 psi Made in USA Engineered for high volume production kitchens, the Legion LTI 125 combines a seamless 125 gallon steam kettle with an integrated MV Series twin shaft agitator. The result is faster cook times, consistent product quality and effortless batch handlingdelivered in a sanitary, fully insulated package thats built to last.
Legion LTI-125 Insulated Direct Steam Kettle with MV Twin-Shaft Mixer – 125 Gal
Stationary • 2/3 Jacket • 304 Stainless • 30 psi • Made in USAEngineered for high-volume production kitchens, the Legion LTI-125 combines a seamless 125-gallon steam kettle with an integrated MV Series twin-shaft agitator. The result is faster cook times, consistent product quality and effortless batch handling—delivered in a sanitary, fully insulated package that’s built to last.
Why this kettle earns its place on your line
- Massive 125 gal (473 L) capacity handles soups, sauces, fillings & more in a single batch.
- Seamless deep-drawn 304 stainless liner eliminates interior weld seams for superior sanitation.
- 2/3-jacketed 304L stainless heating zone delivers rapid, even cooking with 30 psi operating pressure.
- Full-body insulation (Insulated for Safety™) keeps exterior surfaces cooler & saves energy.
- MV mixer bridge with twin-shaft agitator:
- Aluminum, balance-engineered bridge with actuator-assisted tilt-out for easy access.
- Two-speed, totally enclosed gear motor sized for heavy, high-viscosity recipes.
- 304 SS anchor agitator + counter-rotating secondary beater for thorough, scrape-free mixing.
- Removable nylon blades sweep entire kettle wall and floor—no burn-on.
- 2" compression draw-off valve with ¼" perforated disk strainer speeds portioning while capturing solids.
- Four 2"-diameter 304 SS legs with reinforcing bracing & adjustable flanged feet level the kettle on uneven floors.
- Front-mounted steam control valve; rear (¾" NPT) steam & condensate connections simplify installation.
- NSF, ASME & UL compliant—proudly fabricated in Waynesboro, GA.
Technical Specifications
| Model | LTI-125 (with MV Mixer) |
|---|---|
| Usable capacity | 125 gal / 473 L |
| Operating pressure | 30 psi (2 bar) steam |
| Kettle liner | Seamless 304 stainless steel |
| Jacket | 2/3 jacket, 304L stainless |
| Outer casing | 304 stainless, seam-welded |
| Insulation | Full-body mineral fiber blanket |
| Draw-off valve | 2" compression style, 304 SS, w/ ¼" perforated strainer disk |
| Agitation system | MV Series twin-shaft, two-speed gear motor, tilt-out bridge |
| Overall height (J1) | 94.8 in / 2,408 mm |
| Overall width (F) | 50.4 in / 1,280 mm |
| Floor clearance (H) | 11.5 in / 292 mm to draw-off centerline |
| Legs | (4) 2" Ø 304 SS legs with adjustable flanged feet & cross-bracing |
| Utilities | ¾" NPT steam inlet & condensate return; 208/230/460 V mixer motor options |
| Country of origin | USA |
What’s in the box
- Legion LTI-125 insulated steam kettle with factory-installed MV mixer
- 2" draw-off valve & ¼" strainer disk
- Front steam control valve & rear connection fittings
- Operator’s manual & Legion one-year limited warranty
Popular add-ons (sold separately)
- Automatic water fill meter
- Flexible spray-rinse hose assembly
- Tri-basket or single basket inserts for pasta & stocks
- Draw-off drain hose & measuring strip
- Lockable or two-piece hinged cover
Installation must be performed by a qualified steam-systems contractor. Adequate floor support, steam supply, condensate return and electrical service for the mixer motor are required.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.5 ★★★★★
Based on 2012 reviews
Sort
Product Reviews
★★★★★ 5
Shockingly Great: Do Not Be Skeptical Of The Ultra Low Price
Style: Stereo Receiver, Configuration: Receiver
Do not allow the extremely low price on this Sony STRDH 190 stereo receiver to in any way prejudice you against considering it as a wonderful entry-level stereo receiver. I have purchased thousands of products on Amazon over the past 25 years, and I cannot think of any item that pleasantly surprised me more profoundly than this one. I also purchased the matching (style) Sony turntable PS-LX310BT which works perfectly with the STRDH 190 receiver.
Sony's lowest priced receiver now sells for the astounding bargain price of only around $200, though I caught it on sale for closer to $150... and as impossible as this is the believe, it has in recent years gone on sale for as little as $99(!) I have no idea how Sony makes a profit at these price levels.
Now I know, most people would think, "there is just no way a $200 receiver is high quality"... but I am telling you, that is dead wrong in this case, and you should prepare to be blown away by what you get at this crazy low price point.
This is NOT a no frills unit. It is feature packed.
It has connections for TWO PAIR (four total) speakers, and PLENTY of clean no-distortion power to drive all four speakers to loud and clear volume levels. It also has an A/B speaker switch to play through speaker set A, or speaker set B, or all four speakers at once.
It has a phono stage pre-amp which is actually very good. Seriously, it is much better than the phono stage pre-amp built into my Emotiva integrated amp for which I paid $1,000. It plays vinyl loud with no distortion. You will NOT need an external phono pre-amp.
It has excellent Bluetooth wireless connectivity built in... no trouble getting it to instantly recognized sources and play them perfectly. You can play all the music on your iPhone or other digital device, wirelessly.
It has a huge allotment of extra connections, ... a whopping FOUR inputs... so you can also hook up a CD player, and another external device of your choice, and another one after that, and another one after that! (WOW). And that's is not counting your PHONO input which is actually a fifth input connection. Astounding accommodation of external sources at this (or almost any) price point.
If you are a dinosaur who listens to FM ... it's got an FM receiver with 30 station presets, and an output to hook up a proper external FM antenna, and a long-wire FM antenna is included in the package
Sony says the "HiRes" audio produced by this unit is "superior to CD quality"... though I am not sure how to measure that claim, especially if the extrnal source you are using is a CD player.
It comes with a very high quality remote control, with real buttons, and many features.
You can actually program each of your external sources to appear in the illuminated display as the specific names you want, rather than a generic default source name like "CD".
The low price may raise an eyebrow, and the fairly light weight (much heavier on one side than on the other curiously) nature of the unit may also cause doubt... but only until you set it up and start listening, and your jaw drops.
I would put this sub-$200 receiver up against any receiver on the market priced under $800, (and probably several of them priced at twice that much!) and I believe you will not be disappointed in the sound quality of Sony's entry-level unit. You certainly will NEVER find another receiver anywhere near this price point with so many features and inputs... all of which work flawlessly.
This is the greatest bargain in the world of affordably-priced HiFi equipment.
It is easily worth multiple times the asking price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
★★★★★ 5
Overall Excellent - Thorough Review - READ ME
Style: Stereo Receiver, Configuration: Receiver
I'm not an audiophile per se, but I do have elevated listening preferences. I enjoy finding the value in devices, and system configs. So that's the reason I tried this more budget-friendly receiver.
Aesthetics: The look is very sleek and modern, which is great but sometimes I miss the nostalgia of more knobs. There is no base/treble knob and most everything is controlled by remote. That's fine I suppose, just be aware. The volume knob is very large and traditional which I love, but is also very stiff and not buttery smooth like you might expect. Perhaps that will break-in.
Sound Quality: Wow, this sounds incredible. There is definitely a DSP happening that is noticeably awesome. It's referred to by Sony as Pure Direct. If you want to by-pass this, you can, but you'll hear right away the difference is major. I'm using simple Klipsch bookshelf speakers, and my expectations are surpassed on how much they come to life with bright and rich sound. Definitely a nice pairing for those shopping for speakers along with this unit. Overall the SQ is gonna be tough to beat without spending exponentially more.
Remote: The remote is nice, sleek, and has what you need to quickly access. No complaints there.
Installation: Takes minutes, super easy. Didn't follow any instructions due to my general confidence hooking up home audio gear.
Overall: I highly recommend this one, and I'm picky. Initially, I fully expected to return this receiver, but plan to keep it. The only thing that may change my mind, is if I miss the nostalgia... then I'll have to go vintage. But no way a vintage receiver will sound this good. Props to Sony. Well done :)
A+
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 18, 2024
★★★★★ 5
Nice amplifier for the cost.
Style: Stereo Receiver, Configuration: Receiver
I had been using my Marantz model 22 receiver now for a couple years now with the TV, dvd player, and youtube music from my tablet. I like lots of knots and switches on my audio gear, I'm an engineer. I was getting tired of the seemingly endless up and down to adjust volume and whatever. And my inputs on the Marantz were maxed out. I searched Amazon to see what was available as a possible replacement that had a REMOTE. This Sony caught my eye. Relatively inexpensive, plenty of inputs, and specs I could trust, not a 3x4x5 box offering 220+220 watts of unlimited power! Ordered it and been using it for over a month now. Only 2 knobs, how good could that be? Well, it's remote let's me control everything without getting up. Plenty of output power, 100+100 watts of true RMS power. I didn't plan on using the Bluetooth but I tried it with the tablet, keeping the tablet by me, and it really impressed this old audiophile. I really don't have any negatives about it, even the fm sounds great. It was heavier than expected but not as much as that old Marantz. I even popped the cover. The build quality was what I consider good. I only wish I could find a service manual with the schematic for it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 23, 2025
★★★★★ 5
real time and energy saver, as well as $
Size: 16AWG Wiring Harness-2 Leads
If you have a set of LED lights that didn't come with a harness , you can't beat this for the price. By the time you figure in the cost of the parts ( wire, switch, crimps/connectors, not to mention a relay if you are using one) to hardwire a set of lights, let alone the time to assemble, this set up is cheaper by far. harness length is ample, you get a pair of pigtails with connectors for a pair of lights, the relay, switch, fuse block and fuse, and ring terminals for power all assembled for what a switch and some wire would cost. Made everything quick, cheap, and easy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2024
★★★★★ 5
Great wiring harness for light installations.
Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads
This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2020