VW Jetta / Golf MK5 2.5L 5 cylinder 20V 07K T3 top mount turbo manifold + Intake manifold - WITH FUEL RAIL - Black

VW Jetta / Golf MK5 2.5L 5 cylinder 20V 07K T3 top mount turbo manifold + Intake manifold - WITH FUEL RAIL - BlackVW JETTA GOLF MK5 2. 5L 5 CYLINDER 20V 07K T3 TOP MOUNT TURBO MANIFOLD WASTEGATE V BAND SPA Performance brings another great news for VW 5 cylinder 2. 5L lovers! It has better flow compared to the TMW17 thanks to studies by our engineering sector and also accommodates large turbines such as . 70, HX40, GT35 and similar and uses a standard 44 45mm V Band wastegate valve. Application: Jetta Golf MK5 (for other adaptations. consult dimensions and check

• Application: Jetta / Golf MK5 (for other adaptations. consult dimensions and check compatibility with your Project).‚ For Jetta and Golf MK4 (swap) click‚ here‚ or search for TMW23B.

  
  

• Turbine position: Top mount

  
  

• Turbine housing flange: Standard T3 (hot housing for left side - driver)

  
  

• Wastegate flange: V-Band 44/45mm

  
  

• Internal diameter runner: 41.5mm

  
  

• Material: Cast iron

• Turbo Flange Bolt Specs: T2 turbo flange bolt holes: M8x1.25; T3/T4 turbo flange bolt holes: M10x1.5; Wastegate flange bolt holes (if applicable): M8x1.25

VW 2.5L 5 CYLINDER 20V 07K CAST ALUMINUM INTAKE MANIFOLD - WITH FUEL RAIL - BLACK - PRE SALE

The new intake manifold for the VW 2.5L 5 cylinder engine is the newest release from SPA Turbo! t's 100% cast aluminum, with no welds, allowing you to increase the boost without fear of sending the stock intake manifold flying

• Application: VW 5 cyl 2.5L 20V FSI (compatible with hydraulic and electric steering)
• Number of injectors: 5
• Fuel rail: anodized aluminum,‚
• Fuel rail inlet/outlet: -8AN inlet/outlet
• Injectors compatible: Bosch style, 14mm o-ring, compact / standard / long
• Throttle body bolt hole pattern: Stock
• Max working capacity: 10bar (145psi)
• Internal volume: 6,2L
• Material: Cast aluminum
• Compatible with hydraulic and electric steering.
• Includes:
  Fitting for stock breather hose (-10AN).
  2X 1/8" NPT block off (if vacuum ports are not used).
  Oil dipstick holder.
  
• Compatible with original MAP sensor - ref. 0261230095 (not included).
  
• Not compatible with the original plastic engine cover.