Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 10 - Jul 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Front Wheel Hub Bearing Kit for Mazda 3 1.6 Original - PQ1103Vehicle Fitment & Part Details This front wheel hub bearing kit is listed for the Mazda 3 1. 6 Original (04 14). The wheel bearing supports smooth wheel hub rotation. Confirm compatibility by matching the listed fitment details. Verify VIN engine. Key Details SKU PQ1103 Component Front Wheel Hub Bearing Kit Position Front Primary Fitment Mazda 3 1. 6 Original (04 14) Dimensions 30 mm inner diameter, 91 mm outer diameter, 42. 8 mm height OEM References
Vehicle Fitment & Part Details
This front wheel hub bearing kit is listed for the Mazda 3 1.6 Original (04-14). The wheel bearing supports smooth wheel hub rotation. Confirm compatibility by matching the listed fitment details. Verify VIN/engine.
Key Details
- SKU
- PQ1103
- Component
- Front Wheel Hub Bearing Kit
- Position
- Front
- Primary Fitment
- Mazda 3 1.6 Original (04-14)
- Dimensions
- 30 mm inner diameter, 91 mm outer diameter, 42.8 mm height
- OEM References
- BPM53304XA, B45A3304X, BJS7-33-04X, BKC6-33-04X
Product Specifications
| Specification | Value |
|---|---|
| Inner Diameter | 30 mm |
| Outer Diameter | 91 mm |
| Height | 42.8 mm |
| Flange Diameter | 139 mm |
| Bolt Pattern (PCD) | 5X114 |
| Mounting Holes | 4 |
| Wheel Studs | 5 |
| Spline Count | 28 |
Vehicle Fitment
Includes 3 supplied applications covering Mazda. Use the full table below to confirm model, engine option and year range before ordering.
| Make | Model / Application | Year Range |
|---|---|---|
| Mazda | 3 1.6 Original, Active, Dynamic B6ZE, Z6, 2.0 BN Series | 04-14 |
| Mazda | 3 (BM, BN) 1.6 Z6Y1, 2.0 PEY7, PEX2 | 2014- |
| Mazda | CX-3 2.0 PEX3 | 2015- |
Fitment Notes
- Always match the listed vehicle details before ordering. Verify VIN/engine.
- Open-ended dates (e.g. "2002-") reflect supplier catalogue data and must be confirmed against the vehicle before ordering.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, OE reference and original part comparison before ordering.
- Confirm your ABS type (ABS / non-ABS / ASB / encoder ring) before ordering - the wrong ABS variant will not function correctly.
- Match the supplied dimensions to your original bearing: 30 mm inner diameter, 91 mm outer diameter, 42.8 mm height.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will this front wheel hub bearing kit fit my Mazda?
This part (PQ1103) is listed for the fitments shown on this page. Confirm by matching the fitment details and your original part. Verify VIN/engine.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 618 reviews
Sort
Product Reviews
★★★★★ 5
Great minimalist stand
Color: Gray, Color: Gray
Really like the minimalist design of this stand. Quality is top notch with steady material and refined edges.
Had to make minor modifications to prevent laptop touching metal edges when putting on with slight angel tilt.
Overall very satisfied with the product.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 13, 2025
★★★★★ 5
Simple upgrade that actually improves your setup
Color: Black
I didn’t expect much from a laptop stand, but this made a noticeable difference right away. It lifts the laptop to a much better eye level, which helps a lot with posture—especially if you’re working for a few hours at a time.
The build quality is solid. It’s aluminum, has a bit of weight to it, and doesn’t feel cheap. Once it’s on the desk, it stays in place. The rubber grips hold the laptop securely, and I haven’t had any slipping issues.
I’m using it with a MacBook Pro and it fits perfectly. There’s enough space underneath for airflow, and I’ve actually noticed the laptop runs a bit cooler compared to sitting flat on the desk.
Overall, it’s a simple product but very effective. One of those small upgrades that you end up appreciating every day.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026
★★★★★ 5
I like it just fine. It’s good and it works for me.
Color: Black
It’s sturdy and I like the design. Seems pretty comparable to every other MacBook stand, but I chose this one for some reason and I’m happy with it. The height is not adjustable, so if you want that find another one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2025
★★★★★ 5
Great computer stand
Color: Gray
These stands are great. We now have two of them. My wife suffers from Carple tunnel syndrome and these stands lesson the effects when typing. They are stable and hold the computer securely.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 29, 2025
★★★★★ 4
Weighty and well designed
Color: Gray
The Bestand Laptop Stand is a testament to quality and thoughtful design.
From an ergonomic perspective, this stand truly shines. It elevates my laptop screen to eye level, promoting better typing and viewing to reduce strain on my back and neck.
Another standout feature is the weighty and solid construction of this stand. It's crafted from a single piece of aluminum, which not only adds to the stand sturdiness but also gives it a sleek, modern look. The surface is spacious and accommodates laptops from 11 to 16 inches.
Both the weight of the stand and the silicone treads below and underneath the laptop, and on a metal lip in front, ensure that neither the stand nor the computer move around. The manufacturer claims a 66-pound load-bearing capacity for the stand, and I believe it. This thing is rugged.
The inclusion of a slot at the rear for cables to pass through is a small yet incredibly practical detail. It helps keep my workspace organized and tidy.
Three slots in the stand aid with heat dissipation and are yet another thoughtful design feature that cools my laptop during extended usage.
While the stand excels in many respect, one limitation is its lack of height adjustability. However, if height adjustability is important to you, you’ll find lots of other options for stands here on Amazon.
Bottom line: I like it. Chances are, you will too. The Bestand Laptop Stand is a nice blend of durability, functionality, ergonomic comfort, and attractiveness—all at a reasonable price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 25, 2023