SKU: 50356244735

RoadPro RP-9CCP Co-Phase Harness

$26.95 $29.95
Save 10%
No.2 Bestseller on thhungvuong.edu.vn >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

RoadPro RP-9CCP Co-Phase HarnessDe RoadPro RP 9CCP co phase harness is speciaal ontworpen voor het aansluiten van twee CB antennes op n radio in een twin antenne setup. Deze kabel maakt het mogelijk om een zogenoemde co phase installatie te realiseren, waarbij twee antennes gelijktijdig worden aangestuurd voor een aangepast stralingspatroon. Een correcte co phase aansluiting vereist nauwkeurige kabellengtes en de juiste impedantie. Met deze RoadPro harness kiest u voor een kant en

De RoadPro RP-9CCP co-phase harness is speciaal ontworpen voor het aansluiten van twee CB-antennes op één radio in een twin antenne setup. Deze kabel maakt het mogelijk om een zogenoemde co-phase installatie te realiseren, waarbij twee antennes gelijktijdig worden aangestuurd voor een aangepast stralingspatroon.

Een correcte co-phase aansluiting vereist nauwkeurige kabellengtes en de juiste impedantie. Met deze RoadPro harness kiest u voor een kant-en-klare oplossing die afgestemd is op CB-toepassingen.

Voor twin antenne opstellingen

Deze co-phase harness beschikt over:

  • 1x PL259 aansluiting naar de radio
  • 2x afzonderlijke kabels van ca. 2,5 meter
  • Beide uiteinden voorzien van PL259 connectoren

Hiermee sluit u eenvoudig twee CB-antennes aan op één transceiver. De totale lengte bedraagt circa 270 cm (9 ft) per zijde.

LET OP: Voor een correcte werking dienen de antennes minimaal 8 feet (ongeveer 2,4 meter) uit elkaar geplaatst te worden. Daarnaast zal het stralingspatroon worden beïnvloed door de plaatsing van de antennes. Neem bij twijfel contact op voor advies over uw specifieke installatie.

Technische eigenschappen

De RoadPro RP-9CCP maakt gebruik van RG59A/U coaxkabel met een impedantie van 75 Ohm. Deze configuratie is specifiek afgestemd op co-phase toepassingen binnen CB-installaties.

Betrouwbare oplossing voor CB-installaties

Een twin antenne setup wordt vaak toegepast op vrachtwagens of voertuigen waar een symmetrische plaatsing mogelijk is. Met een juiste co-phase kabel benut u de voordelen van deze opstelling optimaal.

De kwaliteit van de coaxkabel en connectoren is bepalend voor de prestaties van uw CB-installatie. Met deze RoadPro co-phase harness kiest u voor een praktische en direct inzetbare oplossing.

Bestel uw RoadPro co-phase harness bij Deltron

Wilt u twee CB antennes aansluiten op één radio met een professionele co-phase oplossing? De RoadPro RP-9CCP biedt een betrouwbare en eenvoudige installatie.

Bestel vandaag nog en realiseer een correcte twin antenne opstelling voor uw CB-radio.

 

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 50356244735

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 1477 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
Y
Verified Purchase
YAAU
Natrona Heights, US
★★★★★ 4
Pretty good product
Style: Single Arm, Size: 13"-34"
Assembly of the actual stand is easy, mounting to a monitor is not because of industrial design fluff. Gotta make the side you DON'T see look "sleek" and "smooth" and "organic" and "integrated" because...reasons. While this is on the manufacturer(s) of the monitor itself, what semi-modern monitor uses 100x100 VESA anyway? The included long screws are too long. Even using the plastic spacers they'll bottom out with a 2mm gap; add washers and it's a lever arm and not solid or confidence-inspiring. I used a die grinder to remove the excess material closer to 75x75 and used the included short screws, perfect. So either include 25mm screws instead of the 30mm (but then the spacers would be too long), or just update the mount plate to 75x75 only, and throw 100x100 "compatibility" into the dustbin of history where absolutely no one will miss it. Arm does move/adjust smoothly and is holding a 34" widescreen where I left it 2 days ago, so it IS a great product once it's properly fitted.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 22, 2026
E
Verified Purchase
Ellie
Charlottesville, US
★★★★★ 5
Great monitor arm stand.
Style: Single Arm, Size: 13"-34"
Very happy with this product. It's sturdy and easy to install. Love the tilt and swivel feature. The fittings for the stand are very well made. I suggest this for the quality and the price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
T
Verified Purchase
TooMuchStuff
Whiting, US
★★★★★ 5
Easy to set up & works great
Style: Single Arm, Size: 13"-34"
It was super easy to get set up, came with all the hardware ypu need to install multiple ways. Holds my monitor securely and is still easy to move around. The adjustments are easy to access and have plenty of variation. Great purchase, such a reasonable price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026
M
Verified Purchase
Mike
New York, US
★★★★★ 5
I love it!!
Style: Dual Arms, Size: 17"-33"
I love this product. I do a lot of gaming and you tube watching. At the same time a lot. With this I keep my desktop clear so I can have my notebooks there and can still have both my monitors up and running. Another plus is if I decide to sit on the couch and play the console I can turn the screen a full 180 degrees so I can setup you tube and play games on the T.V. using the console. The product itself feels to be of decent quality. It is not all plastic. The clamp is nice and strong.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
E
Verified Purchase
Ezra
Whiting, US
★★★★★ 3
Gets the job done. Just barely.
Style: Dual Arms, Size: 17"-33"
It holds up my monitor, but just barely, and without any confidence or finesse. I had to move on from my previous arm mounts, the HUANUO. Those claimed to hold up to a 30 inch monitor and support 20 pounds. When I upgraded to a Samsung Odyssey Neo G8, it could no longer perform its duties. The gas shock was up to task, but the final adjustment piece that tilts it up or down was a hard down. Queue this piece of hardware! 22 pounds is more than 20, and 32 is more than 30. This time I'm not even technically out of spec. The clamping force seems more than adequate to hold this to my desk. I will, at this point, basically walk you through how I feel about this mount, based on the order of installation instructions. The way it goes together means that you will have to pull your desk out to maneuver the clamp in place before snugging it back up to the wall, a point in the HUANO's favor since it had a clever leveraging mechanism that lets you hang it with your desk still against the wall. The way cords route through the arms close to the base means that you have to route them before you put the swivel arm on the base. This is because it has a screw at the front and back to secure the cover, and the angle/height are such that you cannot fit a screwdriver into the bottom one after you mount it. While not impossible to do with it installed, it would involve a right-angle screwdriver. They provide one of those, but the screwdriver bit of it is on the long shaft, and you would need it on the short shaft to get to that screw. The way the swivel arms mount on the base is less than ideal as well. The arm slips onto a robust metal hub, and you tighten a screw that pushes against a plastic tab that makes it harder or easier to move. The location for this screw faces the wall. So you must turn the arm at an extreme angle to make it tighter or looser. Not a big deal, but noticeable. Top arms go on smoothly, cable routing is simple and easy. No complaints about this section. Mounting the monitor. The instructions are to mount the plate to the monitor, and then slide the plate onto the holder and secure it with the screw. I did this for neither of my monitors, although I tried it for my second. My big monitor went smoothly by mounting the bracket ahead of time and just forcing the arm down into position while my monitor rested on my desk. I tried this for my second bracket, but it was much harder to do with the monitor in a vertical orientation. So then I tried to do it the way the instructions wanted. I would have been able to do so, but my monitor has the mounting location set into the back of the monitor. This means that you can't mount it flush and then slide it on because you don't have clearance. So I tried to use the spacers. The spacers aren't spacious enough and the screws bottomed before snugging. While I'm not saying that solution wouldn't have technically worked, I instead reverted back to mounting the bracket first. This time I laid my monitor flat on the desk, reduced the tension in the shock greatly, and placed it into position that way. At the end when it's complete and setup? It works. It will hold the G8. But just barely. The G8 uses an adapter to go from the monitor mounting points to VESA 100. This adapter sticks out quite a bit from the monitor, which means the weight is further away from the mounting point. Getting the tilt adjustment to hold involved a bigger allen wrench and cranking it further than it seems like it was meant to go. It groaned, but it held. It wants to dip if you mess with it, so I crank it again. Will it one day totally fail on me and point my monitor at my desk? Maybe. But it works on day 1, so that's a start.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 29, 2024

recommand products

vivienne westwood archive linen heart stripes mini crossbody tas 4703000bw w0148 c301
123.75
topo designs mountain 90 reistas met wielen 931513203000
107.97
boss crosstown heuptas 50529286 410
134.50
bugatti remo aktetas 49239307
104.97
lauren ralph lauren witley medium emmertas 431 966757 001
199.50