Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
2023-2024 Chevrolet Colorado Wt Lt & Z71 1.75-2.5 Inch Lift Stage 6 Suspension System W/ Billet Upper Control Arms Icon Vehicle DynamicsICON Vehicle Dynamics 2023 2024 Chevrolet Colorado WT, LT, and Z71 suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off road. This Stage 6 system includes vehicle specific tuned 2. 5 Inch coilover shocks featuring CDEV equipped remote reservoirs for
ICON Vehicle Dynamics 2023-2024 Chevrolet Colorado WT, LT, and Z71 suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers' primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road.
This Stage 6 system includes vehicle-specific tuned 2.5 Inch coilover shocks featuring CDEV equipped remote reservoirs for exceptional cooling properties and ICON-engineered coil springs for superior vehicle Inchfeel Inch through the range of travel. These coilovers, specifically designed for the narrower track width of these Chevrolet Colorado submodels, are also height adjustable for 1.75-2.5 Inch of front lift over stock, allowing the use of larger, more aggressive wheel and tire combinations.
Their extended travel length improves performance by increasing front wheel travel by 20 Percent over stock, for a total of 9.5 Inch. Billet aluminum Delta Joint PRO upper control arms not only add strength and durability but help retain factory alignment specs, offer on-vehicle caster/camber adjustment, and the Delta Joint PROs' increased range of motion allows the fitment of the extended travel coilovers and the increased wheel travel this system provides.
ICON 2.5 Aluminum Series CDEV piggyback reservoir rear shocks utilize a vehicle-specific valving and offer increased damping and heat dissipation, balancing the performance of the truck from front to rear. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock.
Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. The ICON Vehicle Dynamics 2023-2024 Chevrolet Colorado WT, LT, and Z71 Stage 6 system is an excellent choice for those drivers looking to enhance the capabilities of their pickup.
Features and Benefits:- This system features upper control arms with ICON's patented Delta Joint PRO. Delta Joint PRO is ICON's innovative new suspension articulation joint which combines the durability and longevity of factory style ball joints with performance and strength that exceeds traditional motorsports-style ball joints. The Delta Joint PRO features a new rebuildable, serviceable design in which any component may be removed, inspected, and replaced without having to purchase a whole new joint. Strength and durability are improved by using a larger ball with 56 Percent more bearing surface than our standard Delta Joint, along with improved lubrication sealing. But improved performance is at the heart of the Delta Joint PRO, with a full 90 degrees of articulation, from one extreme to the other. This represents a 14 Percent improvement in range of motion, over the highly capable original Delta Joint, allowing for maximum bind-free suspension movement through the complete range of travel. The Delta Joint PRO is built to take the abuse, with a chromoly ball and shaft that has a bearing surface hardened to Rockwell C 55. The replaceable races are made of graphite-impregnated sintered metal, machined to the finest tolerance to provide a flawless, metal-to-metal bearing interface. We also redesigned the lubrication system, with lubricant channels that distribute grease more efficiently without extending past the bearing seal.
- 20 Percent increase in wheel travel over stock and improved ride quality with no change in towing capacity
- Vehicle specific tuned front and rear shocks for superior damping and vehicle control
- ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)
- ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes
- Adjustable Coilovers from 1.75-2.5 Inch of front lift height over stock
- 2.5 Series extended travel front coilovers with remote reservoirs for improved shock cooling and performance
- Billet Upper Control Arms with Delta Joint PRO ball joints for added strength, durability, and alignment spec range with on-vehicle adjustability
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8 Inch shafts on all shock absorbers
- High strength alloy CNC machined lower bar pin
- FK rod end bearings for extended longevity and minimal deflection
- 2.5 Aluminum Series rear piggyback reservoir shocks provide increased performance and balanced tune with coilovers
- 100 Percent Bolt-on system - no drilling, cutting, or welding necessary for install
- Adjustable Damping: Yes
- Bushings Included: Yes
- Coils Quantity Front: 2.0
- Damping Adjustment Type: Electronic
- Front Spring Rate Type: Linear
- Grade Type: Performance
- Maximum Lift: 2.5 Inch
- Maximum Lift Front: 2.5 Inch
- Minimum Lift Front: 1.75 Inch
- Mounting Hardware Included: Yes
- Oem Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 33 Inch X 12.50 Inch (Larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Recommended Aftermarket Wheels: 17x8.5 Inch W/ 5.46 Inch Backspace / 18mm Offset
- Shocks Included: Yes
- Spring Color: Black
- Spring Material: Steel
- Add On Part: 198000 - 2 Pin Coilover Spanner Wrench Kit, 191009 - Icon Long 2.5 Coil Wrap W/Logo (14.5-15.5), 198001 - Billet Spanner Wrench Kit, 191013 - Nipple Greasing Adapter Kit, 191014 - .25 Inch Collar Spanner Pin Wrench, 73031 - 23-25 Chevrolet Colorado/23-25 Gmc Canyon Front Diff Skid Plate, 73032 - 23-25 Chevrolet Colorado/23-25 Gmc Canyon Trans Skid Plate
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 1843 reviews
Sort
Product Reviews
★★★★★ 5
The Greatest Chair I've Ever Sat In
Color: Black/Silver, Color: Black/Silver
When I was a boy, my first office chair that I used for PC and laptop work growing up was this chair. This was back before 2010 so it likely wasn't under the Amazon Basics brand but it was the exact same chair design. I've used that chair my entire life really and only had to buy this chair as a replacement as the leather started peeling significantly on my old chair after over 20 years of use. Even though the leather was heavily peeled, my old chair was still extremely comfortable and I would've kept on using it had I not gotten annoyed with having to pick up leather bits and pieces everyday from the peeling. I bought this chair as a replacement and the comfort is still as I remembered. No lower back pain, no butt numbness, no arm numbness, truly such a masterpiece of a chair where it lets you focus on the task at hand instead of focusing on the chair. Before I rebought this chair, I've bought & tried the Secretlab Titan Evo Nanogen, Furmax executive office chair, Neo executive office chair, RS high back gaming chair w/ flip-up armrests, Bestfair high-back office chair, FDW executive office chair, Herman Miller Aeron, and OFIKA executive office chair in search of a potential "upgrade" - every single one of these other chairs was inferior to the Amazon Basics high back office chair in one way or the other. The only thing I will note is that the pneumatic gas cylinder of the Amazon Basics office chair seems to be different from my original chair - it goes higher and has a higher minimum seat height. If you would like to perfectly replicate the original lower seat depth you will have to buy the S6124 extra short office chair gas lift cylinder from ChairPartsOnline - my only nitpick about such a phenomenal chair. In my attached picture I have the Amazon Basics chair w/ S6124 gas cylinder on the right next to the Furmax high-back office chair which although inferior is what I consider to be the 2nd best chair if for some reason you cannot get the Amazon Basics high-back office chair. To sum it up - I HIGHLY RECOMMEND THIS CHAIR!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2025
★★★★★ 4
Comfortable Office Chair
Color: Black/Silver
I have had several office chairs here in my office. Even though this office chair was a bit difficult to assemble, it appears to be a quality item. I was NOT impressed with the instructions - at all. More specific instructions would have been nice. Only time will tell if this was a good purchase and this chair is a good value. Not a bad price for the item as well.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
★★★★★ 5
All-around good chair, suitable for me at 6'6", comfortable and no issues
Pros:
The assembly is straightforward and doesn't require much strength; I would expect my mother to have no issue putting this chair together. If you're elderly or disabled, a relative or helper should have an easy and quick time of putting it together, and there is very little chance of making a mistake during assembly.
Sturdy at and slightly above the recommended weight limit. I peaked around 256 or 258lbs while using this chair, and it didn't show any signs of complaint then, and it hasn't shown signs of wear since.
Really comfortable. I'm an eight-hours-a-day user, almost without exception, and I have no complaints.
The leather holds up very well. I don't expect this to be true forever, but after approximately 1800 hours of use, there is no tear or warning sign.
It leans back super stably. That's the most important aspect for me.
It's tall enough to support my 6'6" frame. My back rests comfortably, so the odds are yours will fit, too. For the scary few who tower over me, and so you can search it easily, here's a height guide:
6'3" 6'4" 6'5" - The chair is good for your heights
6'7" - You should also be well served, unless your height is mostly in your torso.
6'8" - You're at the cusp. I think you will be comfortable in this chair, and alternatives that are built for our (mostly your) height cost so much more. I'd give it a try. I wish you luck.
6'9" 6'10" 6'11" - This is written for 6'9. For 6'10, 6'11, scale the significance of the caution. I think this chair will prove uncomfortable for you or encourage bad posture. I'd encourage you to look elsewhere.
Cons:
This is well covered in other reviews: the caps that cover up the screws on the side of the arms are poorly designed. One falls off every day or two. It's a minor inconvenience, but it's optional. You can toss the caps in the trash. The screws are not exposed. They sit deep within the plastic of the arm. Personally, I just push the covers back on when I notice they fell.
The armrests could be better for me, I think. I'm not sure exactly what my complaint is. I think they are a little too narrow for my liking, but I'm 6'6" with broad shoulders and long arms and unusual joints. The spacing seems fine for a typical user.
Notes:
I only sit leaning the chair back or sitting up straight at the edge of my seat. Some aspects of this review may not translate perfectly to locked-in-place, sitting back, upright usage.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 8, 2018
★★★★★ 5
Awesome!
Update: March 2022 - Funny reading my previous review now. All the cons I mentioned before, I literally don’t even notice at all. In fact, I like the chair I got so much I just got another in white. My boyfriend is using the old one and I needed one for my home office. And sadly, my cats did scratch up the black chair a little (the cats live outside now) but the chair has otherwise stood up to use perfectly. Other than the scratches, is basically like new. I do wish I knew of a good repair kit cause I would like to fix up the scratches. The chair is just extremely comfortable and supportive which I need even more these days for my home business. A very good purchase!!
I just received my chair 2 days after ordering it. It took me about 20 minutes to put it together which was very easy. I am sitting in it now typing this review.
Pros:
-Very attractive. I ordered the black color and it appears just as in the pictures.
-Slides smoothly over my linoleum floors.
-Seat is soft and comfortable, hopefully it will stay that way over time, but too soon to tell.
-Very easy to assemble.
-The seat is good size for the average American and seems comparable in width to the chairs I use at work.
Cons:
-The chair does not lower as much as I wanted. I like my legs at a 90 degree angle when sitting. It is close with my shoes on, but about 2 inches to high. If I had known this, I very likely would not have ordered this chair as its one of my most important features for sitting comfortably. I am 5'6”. I hope that with a little wear the cushion will compress a bit, and if not I may get a small foot stool to solve the problem.
-As others have described, this chair pretty much doesn't recline in any appreciable way even at the loosest setting. Basically to stay reclined you have to keep your legs pushing back the whole time which eliminates the point of reclining. I have read from others that over time, this loosens up. This feature is not very important to me, but may be to others.
-The seat depth is about 2 inches shorter than I would like.
Overall, I think it is a quality chair for the price assuming the above negatives aren't deal breakers for you. I will be keeping this chair since I do not spend a lot of time at my desk and the overall quality outweighs the few negatives for me.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 27, 2016
★★★★★ 5
I would buy it again
Color: White/Pewter, Color: White/Pewter
This chair is very comfortable and easy to sit in for long periods of time. The leather is soft and well stitched.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 22, 2026